MARKING for consumer products and toys MADE EASY!
WITH OUR EXPERT SUPPORT
We take care of your entire CE marking process, including accompanying measures.
All you have to do is affix the CE mark.
Willy Lebherz
Director & founder of easyCE GmbH
Declaration of conformity done!
Receive your CE declaration of conformity ready for signature.
Risk assessment completed!
CE mandatory risk analysis conducted.
Relevant directives & standards applied!
Your product evaluated against relevant directives and standards.
Technical documentation created!
Receive a pragmatic, user-friendly operating manual.
CE mark attached!
Simply affix the CE mark and you're done.
Over 100 CE markings for construction products since 2021 and more every day...
This is how customers rate us in general
How customers rate quality of our work
How customers rate our price-performance ratio
This is what you need to take into account when CE marking your product
You ensure that your products are designed and manufactured in accordance with the applicable regulations. To do this, you prepare the necessary technical documentation and carry out the conformity assessment procedure. After successful testing, you issue the EC declaration of conformity and affix the CE marking. We at easyCE are your partner to help you meet all legal requirements efficiently and reliably.
You also keep all relevant documents for ten years and ensure the conformity of your production through continuous testing. Your toys always have an identification number and your contact information. You ensure that all toys contain instructions for use and safety information in understandable language. If non-conformities are identified, you immediately take corrective measures and inform the relevant authorities.
Before placing a toy on the market, make sure that the manufacturer has carried out the conformity assessment procedure and that the required technical documentation and conformity marking are available. You ensure that your name and contact information are included on the toy or packaging and that instructions for use and safety information are included in understandable language. Trust easyCE to bring toys to the European market safely and compliantly.
During storage and transport, you ensure that toys remain compliant. If non-conformities are identified, you take prompt corrective action and inform the competent authorities. If necessary, you carry out random checks and a complaint register to ensure consumer safety. An importer is considered a manufacturer and is subject to the corresponding obligations when he places a toy on the market under his own name or trademark or when he modifies a toy already on the market in such a way that compliance with the applicable requirements may be affected. At easyCE, we support you in fulfilling all your obligations as a manufacturer should you take on this role.
The experts at easyCE are available to answer any questions you may have about conformity. Do you have any doubts about the CE conformity of a machine you have purchased or are about to purchase? easyCE will be happy to check the CE documentation for you.
Before you place a toy on the market, check that it bears the required conformity marking and is accompanied by the necessary documentation, instructions for use and safety information in understandable language. You ensure that the manufacturer and the importer have met their respective requirements. We at easyCE are at your side as a competent partner to fulfill your obligations efficiently and reliably.
If you have any doubts about the conformity of a toy, do not place it on the market until all requirements are met. In case of any hazard, inform the manufacturer, the importer and the market surveillance authorities immediately. During storage and transport, ensure that the conformity of the toy is not compromised. If non-conformities are identified, take the necessary corrective measures and notify the competent authorities. A distributor is considered a manufacturer and subject to the corresponding obligations when he places a toy on the market under his own name or trademark or modifies a toy already on the market in such a way that compliance with the applicable requirements may be compromised. At easyCE, we support you in fulfilling all your obligations as a manufacturer if you take on this role.
The experts at easyCE will be happy to help you prepare or review the conformity assessment documents, which include product analysis, risk assessment, type plate and the final declaration of conformity. We will also check your operating instructions and their contents for conformity.
Only with easyCE, CE marking is worry-free
Approach to CE marking
Flexibility and concept of support
Scope & scale of support
Contact during project work
Simplified and pragmatic approach to CE marking to ensure complianceg
In line with to your needs, our experts will take you along the CE marking journey
You choose our support model: From "One-stop-shop full service", to partial and modular - whatever you prefer
First things you receive your dedicated, personal CE expert who will support you along the entire process
Other CE service providers
Often without a sense of proportion and unnecessarily complicated
Mostly flexible but often bureaucratic
Mostly flexible in the extent of support
Mostly personal contact
CE software
Follows a standardised process that does not take special features into account
Double burden for you: Software administration + no support for processing
Only according to software scope and purchased modules
No contact
We simplify CE-marking, not the opposite
Reference projects
CE marking for smart drinking bottle
easyCE supports the conformity assessment procedure and the preparation of an operating manual for a smart drinking bottle for storing and drinking liquid foods. In addition, the drinking bottle communicates as a mobile device with the appropriate water dispenser.
CE marking for illuminated sign for outdoor use
easyCE supports the entire conformity assessment procedure including risk assessment for an illuminated sign which is used as an illuminated sign in the lettering in garages and other places where information is displayed with an illuminated sign.
Considered: 2014/30/EU and various harmonized standards (e.g. EN 60335-1: 21012-10, EN 60529: 2001-02)
CE marking for intelligent water dispenser
easyCE supports the entire conformity assessment procedure including operating instructions for an intelligent water dispenser for use in private and public spaces. The wide range of functions of the device, including cooling and boiling tap water, filtering, cleaning and sparkling, were particularly important during the conformity assessment procedure.
Considered: Machinery Directive, EMC Directive, RoHS Directive, WEE Directive, Low Voltage Directive, numerous harmonized standards (e.g. DIN EN 894-1, DIN EN ISO 11200, DIN EN ISO 11688-1)
Learn more about our project references and success stories
Get CE-marking done in 3 simple steps
Step 1
Request our expert opinion
Ask for our expert opinion free of charge and find out what is necessary for the CE marking of your product. Be prepared to describe your product in broad terms.
Step 2
Receive an offer
If your product is subject to CE marking, we offer you our support with the CE marking and all accompanying measures. We would be happy to explain the necessary steps over the phone.
Step 3
We get it done
When you place an order, you will be assigned your own personal CE expert who will carry out your CE marking and accompany you throughout the entire process. Your expert will also be at your side after the CE marking has been successfully completed.
We support you with CE marking and all accompanying measures
Frequently asked questions
Is CE marking required for jewelry, e.g. silver necklaces, earrings, etc.?
If a piece of jewelry does not contain any electronic components, as is often the case with watches, and is not a toy, then it cannot and must not bear a CE mark. We will be happy to test your product and provide you with the certainty.
Which substances are not allowed in toys or must not exceed limit values?
The Toy Directive specifies various substances that may not be present in toys or may only be present up to certain limit values.
As a manufacturer, you should check the declaration of performance of the materials you use in production and ensure that they meet the requirements of the directive. One of these substances is formaldehyde. From 2020, stricter limits for formaldehyde in toys will apply (however, materials manufactured before this date will be protected). The limit for formaldehyde in wood products used in toys that are used by children under 36 months or are intended to be put in the mouth is 0.1 ml/m3 (test method: EN 717-1:2004).
Is CE marking required for furniture (not children's furniture)?
No, CE marking is not required for normal furniture that is not intended for use by children. If it is children's furniture, it must be assessed according to the Toy Safety Directive and is subject to CE marking.
Trust the experts of product safety and compliance
Willy Lebherz - Founder and Managing Director of easyCE
- Expert in product safety and compliance, since 1995
- Recipient of the "Medal of the Order of Merit of the Federal Republic of Germany", awarded in 1983 by the then Federal President Carl Carstens
- Master of measurement and control technology
- Captain (ret.), Project Officer for Technical Logistics in the Army Material Office and Chief of the Telecommunications Repair Company
easyCE is a digital, dynamic engineering office with a focus on product safety and product conformity. We support manufacturers, operators and dealers in designing products safely and offering them on the market in compliance. We are a "full-service provider" and can take over the entire conformity assessment process for you if you wish. To do this, we support you in carrying out risk assessments, researching standards, product analyses, developing suitable safety precautions, preparing user-friendly technical documentation, coordinating tests and all other accompanying measures. easyCE was founded in southern Germany, but is now active globally.
We know the special features that you need to take into account when CE marking your product and we are happy to help you.